Informing Spectroscopists for Over 40 Years

New lens for terahertz radiation

18 March 2016 | News
The THz lens looking small between gloved fingers

Terahertz radiation is of growing interest due to its potential for new spectroscopy and imaging applications as well as wireless communication networks with extremely high bandwidth. However, there are few off-the-shelf components available for manipulating terahertz waves.

Researchers from Brown University’s School of Engineering (Rhode Island, USA) have developed a new type of lens for focusing terahertz radiation (which spans from about 100 GHz to 10,000 GHz). The lens, made from an array of stacked metal plates with spaces between them, performs as well or better than existing terahertz lenses, and the architecture used to build the device could set the stage for a range of other terahertz components that don't currently exist.

The work was led by Rajind Mendis, assistant professor of engineering (research) at Brown, who worked with Dan Mittleman, professor of engineering at Brown. The work is described in Nature Scientific Reports.

“Any photonic system that uses terahertz—whether it’s in imaging, wireless communications or something else—will require lenses”, said Dan Mittleman, professor of engineering at Brown and the senior author on the new paper. “We wanted to look for new ways to focus terahertz radiation.”

Most lenses use the refractive properties of a material to focus light energy. But for this new terahertz lens, the properties of the materials used don’t matter as much as the way in which the materials are arranged. “It’s the architecture here that’s important”, Mendis said.

The new device is made from 32 metal plates, each 100 µm thick, with a 1-mm space between each plate. The plates have semicircular notches of different sizes cut out of one edge, such that when stacked horizontally the notches form a three-dimensional concave depression on one side of the device. When a terahertz beam enters the input side of the device, slices of the beam travel through the spaces between the plates. The concave output side of the device bends the beam slices to varying degrees such that the slices are all focused on a certain point.

Using the configuration developed for this new study, the researchers were able to focus a 2-cm-diameter terahertz beam down to a 4-mm spot. The radiation transmission through the device—the amount of radiation that makes it through the spaces as opposed to reflected back toward the source or dissipated inside the device—was about 80%. That is significantly better than silicon lenses, which typically have a transmission loss of about 50%, and about the same as lenses made from Teflon. The new device has some advantages over existing Teflon lenses, however. In particular, by changing the spacing between the plates, the new device can be calibrated for specific terahertz wavelengths, something that is not possible with existing lenses.

“That can be particularly interesting if you want to image things at one frequency and not at others”, Mittleman said. “One of the important things here is that this design offers you a versatility that a simple chunk of plastic with a curved surface doesn’t offer.”

The work also suggests that the technique of using spaced metal plates to manipulate terahertz radiation could be useful in making other types of components that currently don’t exist. Since a metallic architecture mimics a plastic (a dielectric), this material technology is called “artificial dielectrics”.

“As much as anything else, this paper proves that the technology is feasible”, Mittleman said. “Now we can go and make devices that are totally new in the terahertz world.”

The same technology could be used, Mendis said, to make a polariSing beam splitter for terahertz waves—a device that separates waves according to their polariSation state. Such a device could be used to implement elementary logic gates for terahertz photonic systems, where the binary (one and zero) logic states are assigned to the two polariSation states. That would be an essential component of a terahertz data network.

“The spirit of this work is to develop a new technology for building terahertz components that might be alternatives to things that exist or that might be new”, Mittleman said. “That’s important for the terahertz field because there aren’t a lot of off-the-shelf components yet.”

Rate this Article: 
No votes yet